Router Firmware Update

If you are using your Netgear networking device from a long time, then you might have noticed a slight difference in its initial and current performance. So, don’t you wish to enhance its performance? If yes, then performing Netgear router firmware update is needed. You will find the instructions to execute router update process in this guide along with the ways to troubleshoot the technical issues, in case you face any while going through it. Read on without wasting any more time.

Doing router firmware update via the manual method will require you to access the management console. It is only possible via the router’s default web address. Here are the instructions that will help you to perform Netgear router firmware update with the help of the Netgear Installation Assistant or the Manual method:

• Plug the Netgear Nighthawk router into a working socket.
• Hit the power button.
• Within seconds, the power LED will become solid.
• Establish a strong connection between the networking devices.
• Switch on a computer and launch an internet browser on it.
• In the URL field, type routerlogin.net.
• Press the Enter key.

For your information, if you come across the routerlogin.net not working issue while trying to access the default web URL during the Netgear firmware update process, use the default IP address to log in to your device.

• The Netgear router login portal will appear on your screen.
• Enter the admin login password and username.
• Click on the Log In button.
• The Netgear Genie smart setup wizard will open up.
• There, you need to locate the Settings menu.
• Click on the Maintenance or Administration option.
• Hit Firmware Update or Netgear Router Update button.
• With that, you will be able to complete the Netgear firmware update process using the Netgear router default web address.

In this manner, the Netgear router firmware update can be done via the manual method. However, you can also upload the router’s firmware file on the admin panel. For this, you need to ensure that your wireless router’s firmware file is as same as its model number. If you upload the firmware file of another router model, then there is a possibility that the router will stop working after the firmware update. If that happens, you need to get in touch with our expert team.

In case the previous method was not suitable according to your needs to perform Netgear firmware update, then this one might be able to assist you. This method involves the use of the router’s mobile application. Here, you will get to learn how to perform router update with the help of the Nighthawk app:

• Create connections between your WiFi devices [router and modem] as you did while setting up the router.
• Thereafter, unlock your mobile device.
• If you have not already downloaded the Nighthawk app on your mobile phone, do it now.
• For that, you need to access the Play Store or the App Store.
• Perform Netgear router login with the help of the login credentials.
• Once the main dashboard appears, tap the image of your Netgear router.
• On the Router Settings page, scroll down and tap on the Check for Updates button.
• Is a new firmware update available? Tap on the Update button.

Before you even know it, you will be able to put an end to the Netgear firmware update process using the Nighthawk app. This is to inform you that the mobile device used for updating the router’s firmware need to be functioning on the latest software version. In case you got stuck at any point while trying to perform Netgear Genie update, it is recommended that you take a walk through the troubleshooting tips mentioned in the following section.

1. Follow the Correct Instructions

No matter what, you need to be very careful while giving a shot at the Netgear firmware update instructions. If you are not comfortable walking through the steps given in this guide, then it is recommended that you contact our experts for help.

2. Check the Power Supply

Your wireless router should receive an adequate and uninterrupted power supply from its wall socket. Otherwise, you will face much bigger issues than the Netgear firmware update failed issue.

3. Verify the Cable Connection

The WiFi router should be well-connected to the existing modem. This means that the Ethernet cable connecting them should not be worn out. Apart from this, your devices ought to be placed in proximity. However, you need to ensure that the distance between them is not too less either while doing Netgear router firmware update.

4. Use the Correct Admin Details

Only make use of the correct login credentials to log in to your Netgear router. In case, you changed the default login details of your device sometime earlier, use the new ones instead of putting the default ones to use. Additionally, there should be no typos in the entree of the router’s username and password.

5. Avoid WiFi Interference

Bluetooth speakers, treadmills, televisions, microwave ovens, refrigerators, fish tanks, mirrors, cordless phones, washing machines, and baby monitors should be kept away from your networking router to avoid WiFi interference.

Contact Our Experts for More Assistance

Once you have implemented these router troubleshooting hacks, see if you are able to perform Netgear router firmware update. In case, you are still not able to go about the Netgear firmware update process with ease, then waste no more time reaching out to our technical experts. They will surely help you to complete the router’s firmware update process with ease.